M10 x 130mm High Tensile Anchor Allthread Studs with Setting Tool - Box of 10

In stock

SKU: JSTUD10130HT

Thread Diameter	M10 (10mm)
Thread Length	130mm
Min Drill Hole Depth	90mm
Material	Zinc Plated
Setting Tool Supplied	1
Box Quantity	10

Grade 8.8 zinc plated and yellow passivated
For use with glass spin in capsules or injection resin system
Supplied complete with nut and washer
The studs have external hexagon drive units with one drill bit drive unit in each box of 10
Each stud has a depth mark to indicate correct setting depth and a chisel point to facilitate appropriate mixing when using glass spin in capsules
For load data see the appropriate chemical product

£12.95 £10.79

Skip to the end of the images gallery

Skip to the beginning of the images gallery

Performance Data

The below data is only relevant to the studs, it is not an indication of achievable fixing load, this will be determined by the type of resin, concrete strength or any other base material or anchors they are used with